...Possible causes: • Bad cable or cable that’s too long, causing either the video signals or EDID/HDCP control signals not to be transmitted properly. Make sure that you use quality, high-speed HDMI® cables—they don’t even have to be expensive ones—o...

IP-Based Distribution • IP-Based A/V Distribution • IP-based distribution technologies use transmitters and receivers to extend signals over a TCP/IP network (a LAN or even a WAN, for instance). Oftentimes, they’re called IP streamers when use...

...etc. S/PDIF is based on the professional AES3 interconnect standard. • S/PDIF signals are carried over two types of cables. The first is a 75-ohm coaxial cable with orange RCA connectors. The second is a fiber cable with TOSLINK connectors.

...Distance • Wavelength • Cable • 10GBASE-SR • 300 m • 850 nm • Multimode • 10GBASE-SW • 300 m • 850 nm • Multimode • 10GBASE-LR • 10 km • 1310 nm • Single-Mode • 10GBASE-LW • 10 km • 1310 nm • Single-Mode • 10GBASE-LX4 • Multimode 300 m / • Single-Mo...

...the bridge between one cable’s ferrule and another cable’s ferrule interface. The precision of the ferrule sleeve and its hole determines how well the fibers align, which affects the light signal transmission. • Fiber optic adapters are generally m...

...testing includes patch cable, bulk cable, jacks, patch panels, etc. These tests cover a number of measurements, including: attenuation, NEXT, PS-NEXT, EL-FEXT, ACR, PS-ACR, EL-FEXT, PS-ELFEXT, and Return Loss. Products that are tested together shou...

...wire pairs within a cable. Alien Crosstalk, in 10-GbE systems, is the measurement of the signal coupling between wire pairs in different, adjacent cables. • Factors that affect Alien Crosstalk • The amount of ANEXT depends on a number of factors...

...easy removal of the cable when required. • Replaces Connections and More • DisplayPort replaces the connections between the PC and any associated monitor, but it also does more than that. It can be used to replace the low voltage differential si...