Fotot kan skilja sig från den verkliga produkten.
|
|
|
|
|
|
Tillbehör
Eight ports for flexibility
LIG1080A has eight 10/10/1000-Mbps RJ-45 copper ports. It offers full wire-speed forwarding rates, auto-negotiates for network speeds, and Auto-MDI/MDI-X, eliminating the need for crossover cables.
LIG1082A has six autosensing 10/10/1000-Mbps RJ-45 copper ports. They offer full wire-speed forwarding rates, auto-negotiates for network speeds, and Auto-MDI/MDI-X, eliminating the need for crossover cables. The two 100/1000 Ethernet SFP slots give you networking flexibility and scalability. You can extend your network over multimode or single-mode fibre at distances up to 80 kilometres, depending on the SFP you choose. Black Box SFPs are recommended.
Extreme applications
Encased in an IP30-rated metal case, these switches withstand extreme temperatures from -40°C to +75°C. Use them for:
*Security and surveillance, particularly to backhaul IP security camera data.
*Military applications, especially in ships and other vehicles.
*Factory automation for controlling machinery, PLCs, motor drives, sensors, counters, inspection cameras, and packaging equipment.
*Oil and gas fields or remote equipment monitoring and control.
*Building automation for controlling HVAC and lighting systems.
Maximize uptime
Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. You'll also eliminate the need to send IT technicians on site—thus lowering costs.
The switch is fully manageable through SNMP, a Web browser, Telnet. Control the bandwidth on each port individually and set up Quality of Service (QoS) priority queuing for critical applications.
The switch supports port-based VLAN and IEEE 802.1Q VLAN tagging, MAC-based trunking, IP-multicast IGMP snooping, rapid spanning tree for redundancy. Plus, it has 802.1x port-based authentication for security.
Fast failovers
For redundancy, the switch has two DC power inputs. If one power source fails, the switch automatically falls over to the second power source. It offers a 20 millisecond or less failover. In addition, an alarm will alert you in case of a power failure. The switch also gives you maximum network flexibility: Spanning Tree Protocol (STP/RSTP), Link Aggregation Control Protocol, and a ring protocol.
Installation options
The switch features redundant power inputs and includes DIN-rail and panel-mount kits. The power supplies (MDR-40-12, MDR-40-24, MDR-40-48, and SDR-240-48) are sold separately.
Standards CE; RoHS/WEEE; EN61000-6-2, EN61000-6-4;
Humidity 5 to 95% RH (non-condensing)
Operating Temperature -40 to +167°F (-40 to +75° C)
Storage Temperature -40 to +185°F (-40 to +85° C)
CE Approval Yes
Connectors (8) RJ-45
Data Rate 10/100/1000 Mbps
Dimensions 6"H x 4.3"W x 2.3"D (15.4 x 10.9 x 6.0 cm)
Enclosure IP30
Failover Link loss recovery < 20ms; Single and multiple rings supported
Indicators LEDs: Power, Ethernet port link and speed
Ingress Protection IP30
Jumbo Frames 9KB
Link Aggregation Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
Link Layer Discovery Protocol (LLDP) IEEE 802.1ab
MAC Addresses 8K
Management CLI, WEB-based Management; SNMP v1, v2c, v3; Telnet (5 sessions); HTTPs, SSH; Radius Client for Management; TFTP/FTP for Configuration Import/Export; TFTP/FTP for Firmware Upgrade; Syslog; RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB; DHCP; NTP/SNTP
Management Security HTTPs, SSH; Radius Client for Management
MIBs RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB;RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB
Mounting Type DIN rail
Network Redundancy Fast failover protection rings: Link loss recovery <20ms; Single & Multiple rings supported; Spanning Tree Protocol: IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP; Port Trunk with LACP: Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
Operating Mode Store and forward; L2 wire-speed, non-blocking switching engine
Port Security IP and MAC-based access control; IEEE 802.1X authentication Network Access Control
Power Input: Redundant terminals, reverse power protection; 12-58 VDC; Maximum power: 14 Watts
QoS IEEE 802.1p, 4 queues per port; Scheduling schemes SPQ, WRR
Security Port Security: IP and MAC-based access control; IEEE 802.1X authentication Network Access Control; Management security: HTTPs, SSH, Radius Client for Management
Spanning Tree Protocol IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s
User Controls CLI, WEB-based Management; SNMP v1, v2c, v3; Telnet (5 sessions); HTTPs, SSH; Radius Client for Management; TFTP/FTP for Configuration Import/Export; TFTP/FTP for Firmware Upgrade; Syslog; RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB; DHCP; NTP/SNTP
VLAN Support IEEE 802.1Q tag-based; IEEE 802.1ad Double Tagging; IGMP v1, v2; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering; IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
Weight 1 kg
TAA compliant — YES
LIG1080A:
(1) Industrial Managed Gigabit Ethernet Switch
(2) Wallmount plates
(1) Din rail clip
(1) DC power terminal block
(8) RJ-45 port dust covers
(1) quick start guide
LIG1082A:
(1) Industrial Managed Gigabit Ethernet Switch
(2) Wallmount plates
(1) Din rail clip
(1) DC power terminal block
(6) RJ-45 port dust covers
(2) SFP port dust covers
(1) quick start guide
|